Unombuzo?Sitsalele umnxeba:0086-15355876682

I-Pneumatic Lockout ye-Gas Cylinder Tank Lockout AS-04

Inkcazelo emfutshane:

Intamo ikekele ukuya kuthi ga kwi-35mm

Ithintela ukufikelela kwivalve yesilinda engundoqo

Ifaka amakhonkco entamo ukuya kuthi ga kwi-35mm, kunye nobukhulu obukhulu ngaphakathi kwe-83mm


  • Umbala:Bomvu
  • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Iinkcukacha zeMveliso

    I-Pneumatic Lockout

    a) Yenziwe ngobunjineli beplastiki ye-ABS.

    b) Ithintela ukungena kwivalve yesilinda engundoqo.

    c) Ifaka iiringi zentamo ukuya kuthi ga kwi-35mm, kunye nobukhulu obukhulu ngaphakathi kwe-83mm.

    d) Ufakelo olulula nolusebenzayo ukugcina ixesha lakho.

    e) Ingatshixwa ngeepadi ezi-2, ikhonkco lokutshixa idiameter ukuya kwi-8.5mm.Tshixa ngesitshixo esinye, tshixa amakhamandela ukuya kutsho kwi-11mm.

    Izitshixo zokhuseleko zisetyenziswa ngamaxesha athile kwaye luhlobo oluthile lwamaqhaga.Kukuqinisekisa ukuba amandla esixhobo avalwa ngokupheleleyo kwaye izixhobo zigcinwa zikwimeko ekhuselekileyo.Ukutshixa kunokuthintela ukwenzakala okanye ukufa okubangelwa kukusebenza ngengozi kwesixhobo.Enye injongo kukusebenza njengesilumkiso, esifana nesitshixo sezixhobo zokucima umlilo kudederhu lweevenkile, olwahlukileyo kumsebenzi wokulwa nobusela jikelele wokutshixa.

    I-Lockout/Tagout ishunqulelwe njenge-LOTO, kwaye ingcamango isuka e-United States.Xa izixhobo okanye izixhobo zilungiswa, zigcinwa okanye zicocwa, umthombo wamandla onxulumene nesixhobo uyanqunyulwa.Ngale ndlela, isixhobo okanye isixhobo asikwazi ukuqaliswa.Ngexesha elifanayo, yonke imithombo yamandla (amandla, i-hydraulic, umoya, njl.) icinyiwe.Injongo: kukuqinisekisa ukuba abasebenzi okanye abasebenzi abanxulumeneyo abasebenza kumatshini abayi kwenzakala.

    Kumazwe aseYurophu naseMelika, kukho iimfuno ezithile zokusetyenziswa kwezitshixo zokhuseleko ixesha elide.I-OSHA "iMimiselo yoKhuseleko loMsebenzi kunye neMpilo yoLawulo" iMimiselo yoLawulo lwaMandla anobungozi e-United States ichaza ngokucacileyo ukuba abaqeshi kufuneka bamisele iinkqubo zokhuseleko kwaye bazivalele ngokufanelekileyo ngokwemigaqo.Isixhobo sokumaka sifakwe kwisixhobo sokuhlukanisa amandla kwaye siyeke ukusebenza komatshini okanye izixhobo zokuthintela ukunikezelwa kwamandla ngengozi, ukuqala okanye ukukhutshwa kwamandla agciniweyo, ngaloo ndlela kuthintele ukulimala kwabasebenzi.

    IParameter yeMveliso

    Inxalenye NO. Inkcazo
    AS-04 Intamo ikekele ukuya kuthi ga kwi-35mm
    1 (1)
    1 (2)
    1 (3)
    1 (4)
    1 (5)

  • Ngaphambili:
  • Okulandelayo:

  • Thumela umyalezo wakho kuthi:

    Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    Thumela umyalezo wakho kuthi:

    Bhala umyalezo wakho apha kwaye uwuthumele kuthi